A new 3-dimensional computer model simulated the alleged plane strike to the World Trade Center’s North Tower exactly as reported according to the 911 commission report.
These findings give a very vivid depiction as to how the Sept. 11th attack looks according to the official reports. Except unlike most simulations, this 3D model raises more questions than it answers.
The simulation carefully reproduces in 3D the entire airspace surrounding the North Tower of the World Trade Center as it stood before the attack on Sept. 11th, 2011. According to the official Commission, one of the attackers flew a Boeing 747 into the north face of the tower.
Official reports state that the buildings collapsed due to the heat and fires generated from the two planes crashing into the side of the buildings.
53 video clips were compiled by lead researcher Richard D. Hall into a 1-minute presentation to analyze if the footage was shown on the news the day of the attack aligned with the “official flight path”.
Learn more about this new investigation and watch the 3D simulation on the next page
Garbage, your scum when you report trash like this…
Daniel, your a conspiracy joke…. Dream on, there are aliens under your bed
When the core was falling, the truss floors were pulling down, and since the these floors were also connected to the outer wall, the outer walls folded inwards and outward, the outward falling wall shot out. It didn’t just fall straight down into its footprint.
If those planes hit the Sears Tower, the tower would have still stood because the Sears Tower, or Willis Tower is not a tube-in-tube architectural building.
Why do people have to call names n poke fun just because others feel differently?? Sorry to all that got insulted for giving their opinions to answer my questions. You can give your opinion without insulting others. jmho.
Me too!!
I found that there were over 1400 Muslims working in the towers. so if explosives were used. Possibly they were inside help. ? ?
An f5 tornado has winds of roughly 230 mph, look at the damage they do. some unbelievable. a jet going over 500 mph. Aluminum is structurely strong. and the wings are strong enough to hold hundreds of pounds of fuel plus engines.
Well, hasn’t occurred to you Maria, that those steel beam column after the 70th floors are only 2 inches thick per side and on the last 10 floors, I-beams that are 2 inches thick columns. An aluminum plane that had built up kinetic force can indeed slice into those 2 inch thick steel columns. Don’t bother posting the video of the jet crash experiment, because the steel wall they used was 12 feet solid wall of steel.
Can’t compare a 12 foot solid steel wall to a 2 inch column.
Well, hasn’t it occurred to you Maria, that those steel beam column after the 70th floors are only 2 inches thick per side and on the last 10 floors, I-beams that are 2 inches thick columns. An aluminum plane that had built up kinetic force can indeed slice into those 2 inch thick steel columns. Don’t bother posting the video of the jet crash experiment, because the steel wall they used was 12 feet solid wall of steel.
Can’t compare a 12 foot solid steel wall to a 2 inch column.