This video details how to make a super-efficient water heater thermo siphoning process. Not only are all the parts he uses cheap or free discards, the project does not need electricity or solar power.
To match this video you will need:
Copper Tubing
Stove Pipe
Water heater
Valves
And of course, water and something to burn.
See the process video after the break and then get started on your own source of endless hot water:
This set up was used in water heaters years ago using natrural gas or propane for the heat source. This is nothing new….
Alex Whitley Sr. – could this be beneficial at your place?
COOL!!!!
This has more use. http://www.boundarytec.com/
Is that a wood Gasification unit in the background with the generator?
Isn’t this a pretty obvious conclusion?
Great idea. We should ALL do this. Won’t hurt global warming/greenhouse gases a bit, will it?
Before you slam this guy use your good hand and gently pull your head out of your ass … Watch his videos on youtube , he talks of grid shutdown , essential living , everything he speaks of is correct . why don’t you post a video of your ideas … Jack asses ….look under YouTube engineer 775
Lol pleasel)
Neville says:
“Nice illustration of backup/emergency water heating that will work within your current house system.
One error I noticed, however. If you step up the tubing size to 1/2″ from 3/8″, you do get 33% (not 40%, BTW) more surface area for the same length coil, but the heat you will transfer across that surface must heat 78% more volume of water flowing in the coil. Instead, use SMALLER tubing, and run more of it in the chamber.”
From: http://www.truthandaction.org/generate-endless-hot-water-without-electricity-solar-power/comment-page-9/#comment-656480