This video details how to make a super-efficient water heater thermo siphoning process. Not only are all the parts he uses cheap or free discards, the project does not need electricity or solar power.
To match this video you will need:
Copper Tubing
Stove Pipe
Water heater
Valves
And of course, water and something to burn.
See the process video after the break and then get started on your own source of endless hot water:
This video will get people hurt. He removed the safety relief valve to put the hot water into the tank. He is teaching people the wrong way to do it.
Good idea but poorly designed . The pressure relive valve should never be removed. The cold incoming and hot return from the stove should both have check valves installed and connect to a tee . Then the hot from the stove and lower line from the coil hooked at the tee.
Where did you get the actual stove???
This is of course true; but if everyone were doing this within like five years there would be no trees left in North America.
Hell, this isn’t new.
I’m gonna make one of these and see if it will heat the shed.
Safety First Mr Engineering
Jacob Eaton show dad
also used in the makeing of moonshine
70 years ago they called this a side arm heater..don