Is it practical to drill your own well? Sure!
With the right know-how and equipment, in the right location you can enjoy your own water.
Why not take control of your water supply?
The 2 videos that follow will show you, step-by-step how to drill your own well.
Check them out On the Following pages:
Where the heck does it tell you how to put the thing together?
That is a very old process of well drilling down here in Florida called jetting. It worked wonderful back when the water table was 25 to 30 feet under the surface. But with The inland waterways and canals. Most Wells drilled from the 1980s to present go between 300-1000 feet deep to hit freshwater. Jetting would probably work if you were a little further inland. closer to Myakka city
Robert is a better teacher
Wow! Awesome!!! My house in TN has a well and I love it..but they charge several thousand to drill one!!!
May not be practical for a water supply but looks like a good way to get an 8′ hole to set a utility pole or other needs for a good deep hole. I have lots of blisters from running a post hole digger.
Works great until you get 7′ down and hit rock.
scares me to death…if people knew what I do about this stuff….they would be scared as well…one bad well hole will contaminate drinking water for ever person drinking that water….I hope people call the tech college at vermillion or st.cloud tech an get the information from a qualified instructor,,,or the EPA…DNR would help as well…..first before tapping a pristine aquifer
Not all regulation is bad; this is a great way to contaminate groundwater supplies for a lot of people.
Rj Miner you shoulda done this
That sure wouldn’t work in Up-State NY ~ No way – No how